Operator Interface Terminals
RS232/422 terminals with a low-cost NEMA design and alphanumeric keypads with text displays. Rugged, compact, and industrial.
CTM150/170
The CTM150 and CTM170 are compact, rugged, industrial data entry and display terminals. They are intended for use as operator panels and as service/setup panels in microprocessor based equipment. The only difference between the two units is that the CTM150 has an RS-232 communications interface, while the CTM170 has an RS-422 communications interface and 6 digital outputs. These units offer a large, 16-character liquid crystal display. The sealed keyboard consists of 24 keys, including a numeric keypad and six function keys.
DISPLAY
- Liquid Crystal 5×7 Dot Matrix with Cursor
- 16 character display
- Character-height: 9.66mm (0.380")
- 80 character display buffer
- Display can flash and blink
- Font supports underscore and block
KEYBOARD
- Silicon rubber elastomer
- 24 keys
- Can withstand a million operations
- 6 programmable function keys, 4 characters per key
COMMUNICATIONS INTERFACE
- CTM150: RS-232 (TTL level)
- CTM170: RS-422
- Code: ASCII
- Baud rate: 300, 120, or 9600 user selectable
- Protocol: character mode (XON/XOFF), block mode, and multiple block mode
- Max block length: 800 characters (input), 16 characters (output)
- Max multidrop: 32 units/line
- Connector type: 26-pin ribbon cable connector (3M #3593-6002) mates with 26-pin ribbon cable socket (3M #3399-6600)
CTM150 RS-232 (TTL LEVEL)
- Distance: 50 feet
- Receive logic levels
- Logic 1 +0.8V to -15V
- Logic 0 +2V to +15V
- Transmit logic levels
- Logic 1 < 0.5V with 3KΩ load
- Logic 0 > +2.6V with 3KΩ load
CTM170 RS-422
- Distance: 4000 feet
- Receiver:
- Differential input voltage (open circuit): 0.2V < ΔV in < 6V
- Input impedance: 12000Ω min.
- Logic Levels
- Logic 1: A'-low, B'-high
- Logic 0: A'-high, B'-low
- Transmitter:
- Differential output voltage (open circuit): 5V max
- Differential output voltage (full load, RL=100Ω): 2V min
- Output current (active, RL=100Ω): 20mA
- Output current (inactive): +-100μA
- Logic levels
- Logic 1: A-low, B-high
- Logic 0: A-high, B-low
POWER REQUIREMENTS
- Voltage: +5Vdc+-5% or (+7.5Vdc to +12Vdc)
- Current – CTM150: 50mA max
- Current – CTM170: 100mA max
PHYSICAL
- Size: 104.2mm x 180.4mm x 26.9mm (4.102″ x 7.102″ x 1.060″)
- Weight: 266g (10.5oz)
- Case material: ABP Plastic
ENVIRONMENTAL
- Operating temperature: 0° to +50°
- Storage temperature: 20° to +70°
- Relative humidity: 5% to 95% (Non-condensing)
- Sealing resists dust, liquid
MICROTERMINAL SELECTION GUIDE
Wondering which operator interface model is right for you? Here is a handy tool for comparing connectivity and features of all of our 'microterminal' products.
CTM150/CTM170 USER MANUAL
User manual for the CTM150 and CTM170 Terminals.
CTM200/250/280
The CTM200 series terminals are compact, rugged, industrial data entry and display terminals. They are intended for use as operator panels and as service/setup panels in microprocessor based equipment. The CTM200 terminals have three families from which to choose: the CTM200, basic terminal models, the CTM250, advanced terminal modes with LCD display, and the CTM280, advanced terminal models with LED display.
DISPLAY
- Liquid Crystal 5×7 Dot Matrix with Cursor
- 16 character display
- Character-height: 9.66mm (0.380")
- 80 character display buffer
- Display can flash and blink
- Font supports underscore
KEYBOARD
- Silicon rubber elastomer
- 24 keys
- Can withstand a million operations
- 6 programmable function keys, 6 characters per key, for up to 18 function combinations
COMMUNICATIONS INTERFACE
- CTM200/250: RS-232 (Recommended 50' maximum distance)
- Code: ASCII
- Baud rate: 300, 600, 1200, 2400, 4800, 9600, 19200
- Protocol: character mode (XON/XOFF)
- I/O connector: 26-pin ribbon cable connector (3M #3593-6002) mates with 26-pin ribbon cable socket (3M #3399-6600)
- Switchcraft P/N 760 power connector
POWER REQUIREMENTS
- Voltage CTM200: +5 VDC +-5%
- Voltage CTM250: +5 VDC +-5%, +7.5 VDC to +12 VDC
- Voltage CTM280: +5 VDC +-5%, +7.5 VDC to +10 VDC
- Current – CTM200: 50mA max
- Current – CTM250: 150mA max
- Current - CTM280: 350mA max
PHYSICAL
- 104.2mm x 180.4mm x 26.9mm (4.102″ x 7.102″ x 1.060″)
- 266g (10.5oz)
- Case material: ABP Plastic
ENVIRONMENTAL
- Operating temperature (CTM200/250): 0° to +50°
- Operating temperature (CTM280): -20° to +50°
- Storage temperature: -20° to +70°
- Relative humidity: 5% to 95% (non-condensing)
- Sealing at IP42 resists dust, liquid
- Sealing at IP54 resists dust, liquid with TMA013 cover, recess mounted
MICROTERMINAL SELECTION GUIDE
Wondering which operator interface model is right for you? Here is a handy tool for comparing connectivity and features of all of our 'microterminal' products.
CTM200 SERIES USER MANUAL
User manual for the CTM200 series Terminals.
TM2500/2700
The TM2500 and TM2700 are compact, rugged, industrial data entry and display terminals. They are intended for use as operator panels and as service/setup panels in microprocessor based equipment. The only difference between the two units is that the TM2500 has an RS-232-C communications interface, while the TM2700 has an RS-422 communications interface.
DISPLAY
- Liquid Crystal 5×7 Dot Matrix with Cursor
- 16 character display
- Character-height: 9.66mm (0.380")
- 80 character display buffer
- Display can flash or blank
- 3 cursor font options
KEYBOARD
- Silicon rubber elastomer
- 24 keys
- Can withstand a million operations and 135g of actuation force
- Travel: 0.03"
COMMUNICATIONS INTERFACE
- TM2500: RS-232-C
- TM2700: RS-422
- Transmission: serial asynchronous
- Code: ASCII
- Baud rate: 300, 1200, or 9600 (user selectable)
- Protocol: character mode (XON/XOFF), block mode, and multiple block mode
- Max block length: 80 characters input, 16 characters output
- Max multidrop: 32 units/lines
- DE-9S (communications), DE-9P mating Molex 5219 series (power)
POWER REQUIREMENTS
- Type: external
- Voltage: +5Vdc+-5% or +7.5Vdc to +12Vdc
- Current – TM2500: 250mA max
- Current - TM2700: 350mA max
- Connector: Molex 5219 Series
PHYSICAL
- 104.2mm x 180.4mm x 26.9mm (4.102″ x 7.102″ x 1.060″)
- 266g (10.5oz)
- Case material: ABP Plastic
ENVIRONMENTAL
- Operating temperature: 0° to +50°
- Storage temperature: -20° to +70°
- Relative humidity: 5% to 95% (non-condensing)
- Keyboard display resists dust, liquid
- Case resists dust
- Gaskets included with terminal
MICROTERMINAL SELECTION GUIDE
Wondering which operator interface model is right for you? Here is a handy tool for comparing connectivity and features of all of our 'microterminal' products.
TM25000-2700 USER MANUAL
User manual for the CTM150 and CTM170 Terminals.